Plug N' Play HHO kit HHO generator iX400 Full 12-Cores 3-4L engines PW – HHO FACTORY

Plug N' Play HHO kit HHO generator iX400 Full 12-Cores 3-4L engines PWM 66W 30A

  • EUR 250,00€
    Unit price per 
  • Save EUR 91,00€
Shipping calculated at checkout.


Full iX400 HHO kit All-In-1 plug 'n' play HHO generator car pick-up engines <4L, hydrogen PWM 66W Celtic Tiger™ CE, RoHS

HHO X-CELL is designed for all types of engines and cars, trucks, machinery, boats, electric power generators with a petrol or diesel engine.
List of parts for version Plug 'N' Play All-In-One User-Friendly Ready to use in 5 minutes (Recommended): 
  • 1x 4-In-1 HHO X-CELL 12 Multicores HHO Generator integrated - preinstalled built-in no-need-to-install Cores -1c+2c-3c+4c-5c+6c-7c+8c-9c+10c-11c+12c-. This is a new hybrid of old system HHO dry cell with very heavy and useless neutral plates - NNNNN + NNNNN - NNNNN + NNNNN - NNNNN + NNNNN - NNNNN + NNNNN - NNNNN + NNNNN - NNNNN + NNNNN -73  plates 
    Principle and example:
      
  • 1x 4-In-1 Water Tank integrated - already installed built-in no-need-to-install preinstalled; 
  • 1x 4-In-1 Integrated Super Thin Bubbler built-in no-need-to-install preinstalled; 
  • 1x 4-in-1 Water level sensor with waterproof connectors; 
  • 1x Low Water Level Signalisation LED light with the bracket for a driver with cables +/-; 
  • 1x Waterproof PWM 66W Celtic Tiger™ CE AMP Booster (in 6A/out 30A Ratio 1:5) input-output cables with waterproof connectors; 
  • 1x Plug-N-Go Automatic power detection Start/Stop Relay 80A with 2 buttons 6 Input/Output + Water Level Sensor + Low Level LED Signal terminals; 
  • 2x Battery cables positive/negative connections; 
  • 1x Fuse holder waterproof with connections; 
  • 1x Fuse; 
  • 1x Quick cable spring press connectors for LED dashboard; 
  • 1x Check one-way valve; 
  • 2x Push straight fitting ID 8mm treated 1/4' brass
  • 1x Elbow push 1/4' ID 8mm treated High-quality brass; 
  • 1x Cap-push OD 8 mm; 
  • 1x Pneumatic flexible pipe HHO gas hose output to air intake; 
  • 2x Mounting built-in; 
  • 2x Butterfly Bolts M6 Stainless Steel
  • 2x Nuts M6 stainless steel; 
  • 4x Sring washers stainless steel; 
  • 2x Heavy duty cable tie 650mm x 9mm;
  • 1x Syringe with KOH electrolyte 90% potassium hydroxide ready-to-use; 

      List of parts for version D.I.Y. - Do It Yourself (For experts):

      • 1x 4-In-1 HHO X-CELL 12 Multicores HHO Generator integrated - preinstalled built-in no-need-to-install Cores -1c+2c-3c+4c-5c+6c-7c+8c-9c+10c-11c+12c-. This is a new hybrid of old system HHO dry cell with very heavy and useless neutral plates - NNNNN + NNNNN - NNNNN + NNNNN - NNNNN + NNNNN - NNNNN + NNNNN - NNNNN + NNNNN - NNNNN + NNNNN -73  plates 
        Principle and example:
          
      • 1x 3-In-1 Water Tank integrated - already installed built-in no-need-to-install preinstalled; 
      • 1x 3-In-1 Integrated Super Thin Bubbler built-in no-need-to-install preinstalled; 
      • 1x Waterproof PWM AMP Booster (in 6A/out 30A Ratio 1:5) DIY connections; 
      • 1x Relay 5 pin 12V 80A with brackets; 
      • 4x Blue Flat female connectors; 
      • 2x Battery terminals eye/ring m8 connectors; 
      • 2x HHO generator eye/ring m4 connectors; 
      • 2x Battery cables positive/negative; 
      • 1x Fuse holder waterproof with connections; 
      • 1x Fuse; 
      • 2x Quick cable spring press connectors; 
      • 1x Check one-way valve; 
      • 1x Push elbow treated 1/4' ID 8mm brass; 
      • 2x Push straight fitting ID 8mm treated 1/4' brass
      • 1x Push cap OD 8 mm fitting; 
      • 1x Pneumatic flexible pipe HHO gas clear hose HHO KIT output to air intake; 
      • 1x Syringe with KOH electrolyte 90% potassium hydroxide ready-to-use; 
      • 2x Mounting built-in; 
      • 1x Syringe with KOH electrolyte 90% potassium hydroxide ready-to-use;  

          Hydrogen kit Description: 

          • Load recommended – input 400mА / boosted output peak 2A; 
          • Load current – input peak  3.216 / boosted output peak  16.08A; 
          • Preinstalled HHO Generator X-CELL built-in no-need-to-install; 
          • Dimension: Width 165 mm x high 142 mm x thickness 39.5 mm; 
          • Operating voltage - 2.3-2.5V converted from  12 V- 15V (optional use relay 24VDC contact us); 
          • Electrodes producing area – Stainless Steel 316L; 

          Our products are designed and protected by EUIPO (European Union Intellectual Property Office) and produced in Ireland the European Union in our company HHO Factory, Ltd in compliance with technical standards and industrial manufacturing of such products.


          We Also Recommend