Technical data and additional information read more: Free Worldwide Shipping

NitroOBD2 Chip Tuning Box Plug & Drive OBD2 Chip Tuning Box

NitroOBD2 Petrol: Yellow NitroOBD2 : More Power / More Torque

 

Certificates : CE / FCC /  RoHS

NitroOBD2 is a Plug & Drive Ready device to function the increasing the performance of engine. 

NitroOBD2 is easy to install. Just plug it into the OBD2 connector of cars. NitroOBD2 fits all car from the year of 1996. 

It works based OBD2 protocols as remapping the Car's computer ECU. After driving 200 km road total, NitroOBD2 adjusts itself to the car, 

according to the drivers' habits and always keeps remapping the ECU to increase the performance of engine.

 

What does NitroOBD2 make?

According to your driving habits,  NitroOBD2 makes new map in the car's computer ECU to increase the performance of your car. 

As you driving much more KM/Mile, it renews the map. Thus it keeps the vehicle's power and torque increasing. 

 

What is NitroOBD2 Chip Tuning Box?

  • NitroOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to increase the performance of your car.
  • When it  plugged into OBD2 connector, NitroOBD2 receives the information from the car computer ECU. With the received data from ECU, 
  • NitroOBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure to increase the performance of your car. 
  • NitroOBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine. 
  • NitroOBD2 finds out the hidden power of your car. NitroOBD2 does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting. 
  • NitroOBD2 does not change any of the settings permanently. To turn back to the car's original settings, just unplug NitroOBD2 from OBD2 connector.

 

NitroOBD2 finds out the hidden power of your car.

  • Up to 35% more power 
  • Up to 25 % more torque

 

NitroOBD2 is very easy to use.

Plug NitroOBD2 into OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on. 

NitroOBD2 settings are optimal and the best for your car. Even the parameters are different for each vehicle, there might not be a need to make an additional adjustment. NitroOBD2 will recognize your vehicle and your driving habits after around 200 km/150 miles driving and then NitroOBD2 adjusts itself to match your car perfectly.


NitroOBD2 works on the basis of changing the signal form ECU. As a consequence, it changes the whole injection map. 

The main difference between NitroOBD2 Chip Tuning Box and Remapping tuning methods is that NitroOBD2 Chip Tuning Box is easily removable, 

and after unplug you go back to the factory settings. EcoOBD2 is the cheap and safe type of tuning. 

Remapping is a permanent change to your car. This is the expensive tuning and you cannot remove it. 

NitroOBD2 is equipped with the engine protection function and 100% safe for your car engine. 

NitroOBD2 produced on the printed circuit board in SMD technology. NitroOBD2 Chip Tuning Boxes are high quality. 

 

Installation and Calibration

  1. Pull the Car Key out from the ignition. 
  2. Find OBD2 connector(*) in your car and Plug in EcoOBD2
  3. Insert the key into the ignition and twist the key to the first stage. (Do not start the car)
  4. Press the reset button for about 5 sec. After releasing the button, just wait for a while about 30-54 sec. (EcoOBD2 will communicate and establish connection with ECU) 
  5. Start up the engine.
  6. EcoOBD2 will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus EcoOBD2 will adjust itself to match your car perfectly for more fuel saving.  


Does your car have OBD2 connector?

On-Board Diagnostics, or "OBD," is a computer-based system built into all 1996 and later light-duty vehicles and trucks, as required by the Clean Air Act Amendments of 1990. 

OBD systems are designed to monitor the performance of some of an engine's major components including those responsible for controlling emissions.

 

OBD2 necessarily for cars:

  • Sold after January 1, 1996 in the USA 
  • Sold after January 1, 2001 in the European Union 
  • With Petrol engine sold after January 1, 2003

 

(*)Where located OBD2 connector in your car?

  1. Driver's side, underneath dashboard, in the area under the steering column,
  2. Driver's side, underneath dashboard, between the driver-side door and steering column area
  3. Driver's side, underneath dashboard, between the steering column area and the center console
  4. Driver's side, dashboard instrument/gauge area, between the steering column and center console
  5. Driver's side, dashboard instrument/gauge area, between the driver-side door and steering column
  6. Center console, vertical surface  left of vehicle centreline
  7. Center console, vertical surface right of vehicle centreline or on passenger side of center console 
  8. Center console, horizontal surface  in front passenger area.  

 

 Package content: 

  • NitroOBD2 Chip Tuning Box Interface
  • User Manuel English 

Write a feedback

Note: HTML is not translated!
    Bad           Good

Just Plug & Drive Petrol Nitro OBD2 Plug up to 35% More Power up to 25% More Torque

  • €25 Merry Xmas
  • €22 Merry Xmas

  • You save: €3 Merry Xmas or 12%

34477 Product Views

Tags: cheap box, tuning chip

Give your car a new life! More power and performance, less fuel consumption lower carbon emissions. In just one hour operating our machine, you will remove all carbon deposits from your engine.

Cleaning process in 2 steps takes 1 hour

INTERNAL ENGINE CARBON CLEANING PARTS: * EGR Valves * Combustion Chambers * Exhaust Manifolds * Turbochargers * DPF Filters * Catalysts * Oxygen Lambda Sensors

Only Clean HHO Gas 100% FREE ENERGY Technology is used for Internal engine carbon cleaning!!!

We are only one in Ireland for real cleaning Catalyst EGR DPF with Hydrogen gas 100% Free energy and lowest price!!!

We don't use ultrasonic technology! We don't use chemicals! We don't cut filters! We don't take off Catalyst DPF EGR!

  • Don't confuse to clean DPF properly it has to be taken off and regeneration!

  • To clean DPF, without to be taken off!

  • EGR DPF/FAP CAT cleaning nationwide service

DO NOT REMOVE DPF FROM YOUR CAR !!! DO NOT REMOVE EGR FROM YOUR CAR !!! DO NOT REMOVE CAT FROM YOUR CAR !!!

DPF check now required as part of NCT test!!!

Celtic TIGER - CAT DPF EGR Clean HHOKIT Fuel Saving up to 30% Ireland is a Water as Fuel Hydrogen FREE ENERGY technology specializing in providing severely clogged or oil soaked CAT EGR DPF cleaning for cars/trucks/tractors/generators owners throughout Ireland and Northern Ireland.

We can clean all types of DPF's to original stage. Carbon deposit and errors will be removed and erased. This result can't be reached by any types of liquids offered by other company's No need ECU reprogram/remapping after

Call for free advice!

Internal Engine Carbon Cleaning Car SUV VAN PASS CO TEST
Order ESCORT SERVICE IRELAND or ☎ 087 212 0112

Free Energy HHO Gas

Internal Engine Carbon Cleaner. Give your car a new life! More power and performance, less fuel consumption lower carbon emissions. In just one hour operating our machine, you will remove all carbon deposits from your engine.

HONDA CRV 2.0l PETROL 2000 ZERO EMISSIONS LOW IDLE 0.10% CO, HIGH IDLE 0.00% CO

The National Car Test

(Irish: An tSeirbhís Náisiúnta Tástála Carranna; abbreviated NCT) is a roadworthiness test, which all cars in Ireland must undergo.

What to Do if You Have Failed on Emissions?

If you failed the NCT Emissions test you should buy a 1 HHO KIT Hydrogen generator for fix CO emissions. Drive your car for 1 to 2 days 100 km and then take a re-test. Most Motorists should pass on the 2nd attempt. Watch video and pictures of NCT Exhaust emission PASS.

DIAGNOSE – EMISSIONS TEST FAILURE (Smog Check failure)

SYMPTOM SUMMARY

The vehicle has failed an emissions test or the exhaust emissions are too high as measured by an emissions analyser.

USUAL CAUSE smog test

There are numerous components that if not working properly, can cause high emissions or an emissions test failure. You should read each of the components description and operation in the emission control system section of the manufacturer’s manual covering your vehicle in order to gain a working knowledge of each system. These systems are designed to reduce the emissions (as set by NCT emissions standards). If any of these emissions components fail, emissions can increase. Along with these systems, other components such as spark plugs, plug wires, and filters can also increase emissions if defective. Emissions or smog is a generic term used to describe certain harmful gases in the exhaust. Hydrocarbons (HC), Carbon Monoxide (CO) and Oxides of Nitrogen (NOX) are usually measured in an emissions test. The NCT certain limits on each of these harmful gases emitted. Carbon Dioxide (CO) is also measured, but is not considered a harmful gas. When the measured gases from the vehicle exceed the NCT limits, the vehicle fails the emissions test.

DIAGNOSIS

Diagnosis of high emissions can be an involved process that usually requires special tools and measuring equipment. However, armed with a test report indicating what gases are high can help you determine what systems may not be functional. If the vehicle has failed as a result of high CO and HC, the CO failure should be diagnosed first. If the “Service Engine Soon” or “Check Engine” light is on it should be diagnosed prior to any emissions diagnosis. CO Failure is the result of an excessively rich air fuel mixture. The following is a list of the most common causes:



HC Failure is the result of incomplete combustion. Any item that causes incomplete combustion can result in high HC. The most common causes are:



NOX Failure is the result of combustion temperatures that are too high. The most common causes are:



PRECAUTIONS, TIPS, and NOTES

If the engine is due for a tune up it is wise to perform preventative maintenance prior to spending too much time diagnosing the emissions problem. Proper vehicle maintenance can go a long way in keeping a vehicle’s emissions within specifications. A complete tune-up should consist of: spark plugs, ditributor cap and rotor (if equipped), spark plug wires, air filter, fuel filter, and oil change. Although performing this service is no gaurantee of a passed emissions test, it certainly increases the likelyhood of success. If the vehicle has over 60,000 miles on it and has failed for the reason of high CO, installation of a HHO KIT Hydrogen Generator might be a prudent investment especially if the vehicle is only equipped with one sensor.

Let Us Find the Best HHO Kit For Your Car Or Truck! Our HHO GAS System Will INSTANTLY Match You With The Best HHO Kit And Tell You Why!