Skip to product information
1 of 22

Fuel saver HHO kit iX PREDATOR Pre-installed up to 8L diesel / 4L petrol engines

Fuel saver HHO kit iX PREDATOR Pre-installed up to 8L diesel / 4L petrol engines

Regular price €479.00 EUR
Regular price €699.00 EUR Sale price €479.00 EUR
Sale Sold out
Tax included. Shipping calculated at checkout.

Shipping & Returns

New fully pre-installed, ready to fit in 5 minutes in three steps!

With the wireless remote control, you can easily set the HHO gas production while driving. We recommend wireless control with a BLUE LCD for accurate fuel consumption adjustment. The driver can adjust consumption while driving.

The HHO chip does a great job with reducing the amount of fuel in the injectors.

HHO FACTORY, Ltd develop the first compact HHO Kit HHO Generators iX Plug-n-play 2V cathode-anode technology without useless neutral plates. This technology is not yet on the market.

We are engineering on a higher-level User-Friendly Pre-installed Plug-N-Play calibrated with plug-n-play HHO chip for all cars with OBD2.

We manufacture HHO kit iX PREDATOR at the highest level user-friendly and pre-installed Plug-N-Play Celtic Tiger  PWM 117 500Hz calibrated with plug-n-play HHO chip for all cars fr 1996 with OBD2.

Our HHO kits comply with the thermodynamics! 

Learn more about: HHO Videos | HHO Manual | F.A.Q.

Unrivalled benefits of the HHO iX-CELL with PWM.

  • 8 Years warranty on HHO generator;
  • All HHO Kits are Plug-N-Play Pre-installed; 
  • Ready to use in 5 minutes; 
  • No Required To Install; 
  • HHO generator with 2V low energy 4 iX-cells PWM for 12V-24V; 
  • Build-in HHO generator + Water tank + level sensor + Bubbler; 
  • Display, Smart relay voltage detection; 
  • No need for an antifreeze solution until -60°C+50°C
  • All User-Friendly.
  • Calibrated for thermodynamic law!
  • No bumper installation is required, 
  • The HHO X-cell is the thinnest and smallest HHO KIT, 
  • All-In-One, Plug N 'Play ever made in Ireland EU by HHO FACTORY, 
  • Brand new 2V PWM, CELTIC TIGER ™ uses maximum KOH, 
  • Four LCD meter: wattmeter, voltmeter, ampermeter, total energy, 6-100V 20A ; 
  • Auto power ON HHO X-Cell when the engine is running; 
  • Set a delay of auto Relay control after engine ON is detected; 
  • Auto power OFF HHO X-Cell when the engine is turned OFF;  
  • Heavy-duty aluminium waterproof case with Plug-N-Play; 
  • PWM is automatically running on maximum current and KOH - this is not possible with another PWM and type of generators!; 
  • You feel free and without limits, without overheating, without overload, 
  • The new X-Cell HHO kits are suitable for tropical heat up to 50°C, 
  • It does not need an antifreeze mixture down to -60°C. 

HHO kit Description:  

  • HHO 1x4 iX-Cells: HH - Cathodes, O + Anodes, no need for neutral plates; 
  • Energy consumption 3-16W; 
  • HHO production up to 0.9-4.8LPH; 
  • Water Refuelling approx. 6000-2000km or nonstop production every 60 hours; 
  • Dimension: Width 145 x High 115 x Deep 33 mm; 
  • Operating voltage - Only 2.0V converted from  12V/24V/36V; 
  • Electrodes producing area – Stainless Steel 316L; 
  • Durable composite body used in sports cars up to 230°C peaks (No plastic); 
  • Fitting material: durable brass, nickel surface; 
  • Working temperature -40°C +50°C

List of parts for version Plug-N-Play All-In-One:

  • 1x HHO Generator low energy four iX-Cells waterproof Plug-N-Play pre-installed built-in; 
  • 1x Water Tank - waterproof Plug-N-Play, pre-installed built-in; 
  • 1x Internal Bubbler - waterproof Plug-N-Play, pre-installed built-in; 
  • 1x External Bubbler 350ml with safety valve;  
  • 1x Water level sensor - waterproof Plug-N-Play, pre-installed built-in; 
  • 1x PWM 2V-12V/24V/36V Celtic Tiger™, efficiency ratio 5MLPM:1WATT; 
  • 1x Wireless remote control with receiver 360W; 
  • 1x LCD Display 20A 4-in-1 Watts. Volts, Amps, Total Energy; 
  • 1x Start/Stop Relay with voltage detection 20A with menu and two buttons; 
  • 1x HHO chip with OBD2, green and white wires (Variant with HHO chip only); 
  • 1x Battery twin cable double-wall +/- waterproof Plug-N-Play; 
  • 1x Fuse holder waterproof with rings; 
  • 1x Fuse; 
  • 1x Cap plug Nylon; 
  • 1x Elbow push in 1/4" ID 8mm for air-intake; 
  • 1x Straight push in 1/4" ID 8mm treated High-quality Stainless Steel 316;
  • 1x Elbow fitting in 1/4" OD 6mm treated plastic; 
  • 1x Clear Pneumatic Teflon pipe 0.5m between bubbler built-in HHO kit and Second bubbler;
  • 1x Black Pneumatic PU pipe 1.1m for HHO gas from the second bubbler to air intake
  • 2x Mounting built-in; 
  • 2x Cable tie Heavy duty 1000mm x 9mm;
  • 1x Syringe 100ml;
  • 1x Potassium hydroxide KOH 90% electrolyte 100g enough for one year; 
  • 1x Low Water Level Signal LED light dashboard pre-installed;
  • 1x Double cable for LED dashboard; 
  • 2x Butterfly bolts M5 Stainless Steel; 
  • 2x Nuts M5 stainless steel; 
  • 4x Flat washers stainless steel; 
  • 2x Spring washer stainless steel.
The assembly of the hydrogen generator does not physically touch the engine or fuel tank. This facility does not require any approval by the authorities or the insurance company's registration process or approval. No legislation prohibits modern hydrogen generators for vehicles in Europe or worldwide.
View full details