Multi-purpose Brawn’s Gas Hydrogen Fuel Cell HHO Generator HC12/24V-PRO
Usage: hydrogen fuel cell generator (HHO-generator) suitable for cars, vans, trucks, agriculture and construction equipment powered up to 2000 - 4000 - 6000 cc engines.
The Hydrogen Engine complies with requirements of EU standards – it is laboratory tested and the conformity assessment procedure is executed according to Directive 2006/95-ЕС of the European Parliament. СЕ 2024 conformity marking is applied to our product.
Operating voltage: 12 V – 14 V
Current consumption: 10 А – 15 А
Productivity: 120 liter of Brawn’s gas per hour.
Fuel efficiency: 15% – 40%
Electrolyte freezing temperature: -25 degrees Celsius
Warranty: 24 months (observing all operating conditions)
All Brawn’s gas hydrogen fuel cell generators manufactured by us are based on the HC12/24V Pro Model. The various models of Generators differ from one another in their input signals and sensors for control signals detection.
Scope of delivery of the Brawn’s Gas hydrogen fuel cell Generator:
- Hydrogen fuel cell
- Water filter/Expansion tank.
- Relay – 40А
HHO hydrogen fuel cell HC12/24V
- Operating voltage – 11-14.02 V
- Load current – 5 to 15 А
- Operation temperature – 15 to +50 degrees
- Level gauge current consumption: – <10 mA
- Electrolyte concentration (KOH) – 10 – 14%
- Productivity – up to 1 l/m of Brawn’s gas.
- Overall dimensions (mm): H=210 , L=160 , W=55
- Casing – polypropylene
- Electrodes – Steel 316L
The Electrolyser is a device wherein process of electrolyze is conducted via an electrochemical method and so it results in the generation of “Brown’s gas”. The electrolyser casing is made from polypropylene – a material with very good features of resistance to temperature variations, vibrations, loads and aggressive chemical media. It has form of classic accumulator. It consists of casing, top cover, connecting pieces, valve and level gauge.
Electrodes are positioned inside the Electrolyzer. Electrolyze is performed with their assist. The electrodes are made from steel grade 316L. Electrode power supply is provided by means of stainless steel stud pins – А2 (grade 304). For assembly stainless steel washers and nuts are used. For better electric conductivity out of casing, the washers and nuts used for tightening cable shoes of Electrolyzer power supply unit, are made from plain steel – galvanized.
Stickers are used to indicate holes and connection pieces purposes. The power supply terminals are designated with + and – signs directly encrusted in casing plastic material. An information sticker about product name and manufacturer information and contacts is attached to the Electrolyser. English language.
Level gauge – LM1
- Power supply voltage – 12-14V
- Current consumption :< 10ma
The Level gauge is electronic device to indicate the level of electrolyte in the Electrolyser. There are two light indicators – red and green. The green light indicator indicates maximum electrolyte level in the hydrogen fuel cell. If the red light indicator goes on then it is required adding immediately distiller water in the hydrogen fuel cell. In case of both light indicators are off, the level is normal.
CAUTION: Check the level only when the hydrogen fuel cell is supplied (When the car is at the contact and power supply voltage is delivered to hydrogen fuel cell). Otherwise the red indicator will be on and these will be no mean that the level is low but only that no supplying to the Generator.
30 Days money back - 100% Satisfaction - 2 Years warranty
Free shipping Free Installation Sale from 1. December 2016
Xcell HHO gas HHO kIT Fuel Saver Carbon Clean for Car MPV SUV
- Brand: www.hhoxcell.com
- Product Code: HHO-PNG-XCELL
- Availability: 100
14434 Product Views
Tags: hydrogen, fuel economy, hho, hydrogen fuel cell, emissions, fuel cell, fuel saver, carbon emissions, hho generator, hho kit, hho gas, car, van, gasoline, petrol, lpg, cng, diesel, hho gas, hydrogen, fuel, cell, ship, Abarth, Alfa, Romeo, Aston, Martin, Audi, Bentley, BMW, Bugatti, Cadillac, Caterham, Chevrolet, Chrysler, Citroen, Dacia, Ferrari, Fiat, Ford, Honda, Hyundai, Infiniti, Jaguar, Jeep, Kia, Lamborghini, Land Rover, Lexus, Lotus, Maserati, Mazda, Mclaren, Mercedes-Benz, MG, Mini, Mitsubishi, Morgan, Nissan, Noble, Opel, Pagani, Peugeot, Porsche, Radical, Renault, Rolls-Royce, Saab, Seat, Skoda, Smart, SsangYong, Subaru, Suzuki, Tesla, Toyota, Vauxhall, Volkswagen, Volvo, Zenos Acura, Buick, Cadillac, Dodge, Equus, GMC, Lincoln, Ram, Scion, Sprinter, Volkswagen, VW, Passat, Volvo
Co2 Fail? How to Reduce Carbon Emissions and Smoke? NO Problem for HHO KIT Tiger Hydrogen and PASS the NCT DOE Emissions Smoke Test in Ireland or France!
Tiger Hydrogen Engine Carbon Clean Mobile Service IRELAND Call 087 212 0112 or send email here!
Engine Carbon Cleaner. Give your car a new life! More power and performance, less fuel consumption lower carbon emissions. In just one hour operating our machine, you will remove all carbon deposits from your engine.
Skoda OCTAVIA 1.4 Petrol 2004 Tiger Hydrogen Engine Carbon Cleaned with result: Low Idle 0.01% High Idle 0.02% NCT CO2 PASS 21.06.2016
Skoda OCTAVIA 1.4 Petrol 2005 Tiger Hydrogen Engine Carbon Cleaned with result: Low Idle 0.03% High Idle 0.02% NCT CO2 PASS 10.06.2016
(Irish: An tSeirbhís Náisiúnta Tástála Carranna; abbreviated NCT) is a roadworthiness test, which all cars in Ireland must undergo.
If you failed the NCT Emissions test you should buy a 1 HHO KIT Hydrogen generator for fix CO2 emissions. Drive your car for 1 to 2 days 100 km and then take a re-test. Most Motorists should pass on the 2nd attempt. Watch video and pictures of NCT Exhaust emission PASS.
The vehicle has failed an emissions test or the exhaust emissions are too high as measured by an emissions analyser.